@Allen_Marshall wrote:
Need to take images and fit multiple images per page(like 4) using Images2PDFC.exe
Otherwise each image is on a separate page.
Doable?
Posts: 1
Participants: 1
↧
Create PDF with multiple images per page
↧
PDF merge documents
@craigmorton wrote:
I have ran PDF merge and all works fine 1st time but when I try and to do this for future merges I do not get the program box/print that allows me to merge documents ?
Any suggestions
Posts: 3
Participants: 3
↧
↧
Which of todays option of PDFCreator matches old version 1.7.2?
@linjoh88 wrote:
Hi,
We are using an old version of PDFCreator 1.7.2. We would like to know which one we should get that matches the one we have today. Do anyone have any ideas?/Linda
Posts: 2
Participants: 2
↧
PDFCreator 3.4.0 puts a lock on the PDF files it generates
@rward wrote:
Hello,
I have downloaded the latest release of the free version of PDFCreator, which is 3.4.0 and am testing it on my laptop running MS Windows 7 Professional.
It works well so far except that PDFCreator holds a lock on the PDF file it generates. When I have my program print multiple files in rapid succession, PDFCreator creates all of the PDF files but then holds a lock on one of them. I haven't seen a pattern yet but it appears to hold a lock on either the first or the last PDF file generated. It would make some sense if it were the last.
I am using the default profile and have it configured to not open the generated PDF files after saving. I also have the profile configured to automatically save the files without showing a Save dialog box. Having the profile use interactive mode yields the same result.
After the files are generated, neither PDFCreator nor PDFArchitect appear on the Windows taskbar or in the Applications tab of the Task Manager.
The lock appears to be indefinite. To remove the lock, I end the architect.exe process using Task Manager. Then I'm able to move or delete the generated file.
I have tried disabling history on the PDFCreator's Home screen in case that's the reason.
Any advice would be greatly appreciated.
Posts: 2
Participants: 2
↧
PDFCreator 3.4.0 Error when trying to send to Email
@JoAnneBrody wrote:
I have set up two users now in my domain that are getting an error when clicking on the Email tab. It says: An error occurred: Unknown error in e-mail client action: (11999). I tried looking up this error on line and some said to disable the Open Email-Client action and enable the run script action instead of it. I could not find out how to open this email client action and disable it nor the run script. Please give exact instructions for those of us who are new to using this program. Thanks.
Posts: 1
Participants: 1
↧
↧
New 3.40 version not allowing filename edit upon print
@donaldp wrote:
Hi,
In the new 3.40 Build 5156 PDFCreator it is not saving my filename edits as it has been in previous versions.
I set it to prepend the date/time stamp to ensure uniqueness and then add a descriptor.
I can enter the descriptor but when I look in the save directory it just has the time/date as the filename.
I didn't make any config changes when going to the latest version, do I need to make a change in order to allow editing the filename upon print/save?(upload://wdnrV5WnsQbPtTLfr0gJK6Q7ZIj.png)
Posts: 1
Participants: 1
↧
Com interface Clear() command
↧
Available PDF Creator version for WinXP
@vsegvic wrote:
Hello fellow forum colleagues,
I need some help:
I have an old computer with WinXP, which I use only for Hyperlink communication with processor (has serial port).
I need to be able to print to pdf the values that pop up.
Latest version that is compatible with winXP was 2.5.0 (quickly fixed with 2.5.1. because of some bug- not sure if 2.5.1. is compatible with XP).
On the download page of this site, version 2.5.0./2.5.1. is no longer available.
How could I get my hands on that version of PDF Creator?Thanks in advance,
Vlado
Posts: 2
Participants: 2
↧
PDFCreator infected with win32:pup-gen
@Thefaroah wrote:
Just installed 3.4.0. During the process Avast showed that isop.exe was infected with win32:pup-gen.
It went to the virus chest. PDF creator appears to have successfully installed.
Saved a screen shot of more detailed info from Avast, but nowhere to attach it here.
Posts: 1
Participants: 1
↧
↧
Check for update settings => Where is Never?
@jeromeF wrote:
Hello,
The Never option has disappeared with 3.4.0?
Thanks
Jerome
Posts: 1
Participants: 1
↧
Printing HTML from command line returns blank document
@deRAn wrote:
Greetings, I've downloaded the latest version of PDFCreator (3.4.0). When I try printing a HTML file with any profile (autosave, since I'll need to attach it to an application), if I do it from the GUI it works correctly, but running
PDFCreator.exe /PrintFile="Desktop.html"
I obtain a blank PDF file in the with right path and name but only displaying title and "page 1 of 1".
I've also tried some of CL parameters specified in documentation, but nothing changes and however the default value for those parameters is fine. Maybe this is a bug? Or maybe there should be a parameter to specify input type?
Posts: 1
Participants: 1
↧
Print to Thunderbird not working after update
@zookey wrote:
After updating to version 3.4.0, and updating Thunderbird to latest version 60.5.2, printing PDF to email is not working anymore. Any solution?
Posts: 2
Participants: 2
↧
Any clustering / failover options for PDFCreator Server?
@nathan1658 wrote:
Hi all, are there any option/ best practices for such clustering/ fail over for PDFCreator Server on Windows server 2016? Thanks!
Posts: 4
Participants: 2
↧
↧
PDF Creator shows promise but needs work
@Pollik wrote:
I have a 106 PDF files which I need to merge.
The desktop app will only load 93 of them (repeatable), which is clearly not OK. In addition, I can only cancel the job by clicking 93 times, which is also clearly not OK. Worse, even forcing the app to close doesn't work, because when it is launched again, it turns out that it has saved the job...and I still have to click 93 times to cancel the job.
So I tried the online version, which did at least load all 106 files. Unfortunately, the upload didn't maintain the order in which the files are displayed on my screen (the files are named numerically to automate sorting). I assume that the files are displayed on the website in the order in which the uploads completely, which is no use to me.
I know I can sort them manually, but...dudes, this is 106 files. That will take a huge chunk of my time and frankly should not be necessary...there were already in order until PDFForge took charge of them.
I realise that that this is provided free of charge and that PDFForge owes me nothing and I comfortable with that. So this is feedback and not a whinge. But...the free stuff is your shop window. Folk look at your free stuff and decided whether to buy the full product.
It is a shame. So close to what I need, but ultimately doesn't help me.
Thanks for trying, though
Posts: 3
Participants: 2
↧
Error with Convert with PDFCreator (v3.4.0)
@jeromeF wrote:
Hello,
I have this problem when I click right on a file and select Convert with PDFCreator.
The printer is available in the printer list of the PC.
Is a magic command that can solve this problem ?Thanks
Jerome
Posts: 1
Participants: 1
↧
How do I prevent a saved PDF from opening after saving?
@Analicia wrote:
I recently updated to PDFCreator version 3.3.2 and I'm trying to save multiple PDFs at a time. It really puts me back trying to save 20 PDFs and they all end up popping up in my face. I cannot figure out how to turn off this setting. I deleted Architect to help combat this but now it just pulls up in my default PDF reader. Any help would be wonderful!
Posts: 1
Participants: 1
↧
Problem with output
@Hossein_Jafari wrote:
hello
first of all tnx for your good software
i downloded free version and convert a txt file to a pdf but there is a copy of file name in the head of each page !
is there any solution ?
Posts: 2
Participants: 2
↧
↧
Change profiles with COM interface
@silviocia wrote:
Hi, I would like to change the profile settings through the COM interface using .net and PDFCreator 3.3.2
I don't find a way to do these changes without using the printjob object.
My purpose is:
- open pdfcreator
- set the default profile to:
a) automatic saving
b) set the folder where to save the files- close pdfcreator
Is it possible ?
Thanks for help.
Posts: 2
Participants: 2
↧
put a password into the file using the command line
@kaydogan wrote:
Hello there
I can use pdfcreator.exe to create the file from the command line as follows, but again I want to put a password into the file using the command line.
If you could help with this situation, I would greatly appreciate it.pdfcreator /printfile="c:\scan\3.tif "/outputfile="c:\scan\3.pdf"
Posts: 2
Participants: 2
↧
Ghostscript error on Asian font Windows
@TatianaS wrote:
Hello,
I have some users in Korea getting this error. The users are on the latest version on PDFCreator and the Windows 10 with default language is Korean. After this error happens, every conversion fails. It look like it got stack in error state and can't recover. Please advise.pdfforge.PDFCreator.Conversion.Jobs.ProcessingException: Ghostscript execution failed: Error: /undefinedfilename in (C:\Users\sel-heatherk\AppData\Local\Temp\PDFCreator\Spool\2-7EC956F8651E4CBC86D28785DA67CA88.PS)
Operand stack:Execution stack:
%interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push
Dictionary stack:
--dict:1007/1684(ro)(G)-- --dict:0/20(G)-- --dict:78/200(L)--
Current allocation mode is local
Last OS error: No such file or directory위치: pdfforge.PDFCreator.Conversion.Ghostscript.Conversion.GhostscriptConverter.DoConversion(Job job)
위치: pdfforge.PDFCreator.Core.Workflow.JobRunner.Convert(Job job)
위치: pdfforge.PDFCreator.Core.Workflow.JobRunner.d__10.MoveNext()<---2019-03-12 11:04:19.3177 [Fatal] 4716-10 (ProcessingThread) pdfforge.PDFCreator.Editions.EditionBase.ProgramBase.CurrentDomain_UnhandledException: Uncaught exception, IsTerminating: True
Additional Data:
InnerException=pdfforge.PDFCreator.Conversion.Jobs.ProcessingException: Ghostscript execution failed: Error: /undefinedfilename in (C:\Users\sel-heatherk\AppData\Local\Temp\PDFCreator\Spool\2-7EC956F8651E4CBC86D28785DA67CA88.PS)
Operand stack:Execution stack:
%interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push
Dictionary stack:
--dict:1007/1684(ro)(G)-- --dict:0/20(G)-- --dict:78/200(L)--
Current allocation mode is local
Last OS error: No such file or directoryThanks.
Posts: 1
Participants: 1
↧